ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ KLM501349-LM501314
Inner diameter:: 41.275 mm
Outer diameter: 73.431 mm
The size of the width: 21.43 mm
Outer diameter: 73.431 mm
The size of the width: 21.43 mm
Технические характеристики из каталога производителя:
- ОбозначениеKLM501349-LM501314
- ПроизводительFAG
- e0,4
- Y00,83
- db min53 mm
- Ca min1,5 mm
- Cb min4,5 mm
- r1, 2 min3,6 mm
- r3, 4 min0,8 mm
- rb max0,8 mm
- Y1,5
- t21,43 mm
- d73,431 mm
- B19,812 mm
- D157,2 mm / α
- Da max46,5 mm
- da min66 mm
- ra max3,6 mm
- m0,385 kg / α Вес
- Cr55000 N / динамическая грузоподъемность, радиальная
- C0r68000 N
- nG10000 1/min / Предельная частота вращения
- Cur8100 N / Нагрузка предела усталости, радиальная
- C16,604 mm
- a18,2 mm / α
K21 NBR(5x14x8)
Manufacturer: KASTAS
Sizes: 5x14x8 (mm)
Торцевое уплотнение RM MG12-48
Manufacturer: RiMi
AT20 DD
Manufacturer: ContiTech AG
Подшипник NUP 2215
Manufacturer: NACHI
Sizes: 75x130x31 (mm)
Weight:: 1.57 (kg)
T10/730 ( Т10 730 )
Manufacturer: ContiTech AG
K41 PTFE/NBR(40x29,3x4,2)
Manufacturer: KASTAS
Sizes: 40x29,3x4,2 (mm)
10X650 Z 25,5
Manufacturer: ContiTech AG
AT3/351 GEN III ( АТ3 351 GENIII )
Manufacturer: ContiTech AG
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 1213-K-TVH-C3 + H213
Manufacturer: FAG
Sizes: 60x120x23 (mm)
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 17x28x7 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.