ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ KHM88649-HM88610
Inner diameter:: 34.925 mm
Outer diameter: 72.233 mm
The size of the width: 25.4 mm
Outer diameter: 72.233 mm
The size of the width: 25.4 mm
Технические характеристики из каталога производителя:
- ОбозначениеKHM88649-HM88610
- ПроизводительFAG
- e0,55
- Y00,6
- db min48,5 mm
- Ca min3 mm
- Cb min5 mm
- r1, 2 min2,3 mm
- r3, 4 min2,3 mm
- rb max2,3 mm
- Y1,1
- t25,4 mm
- d72,233 mm
- B25,4 mm
- D156,8 mm / α
- Da max42,5 mm
- da min60 mm
- ra max2,3 mm
- m0,5 kg / α Вес
- Cr68000 N / динамическая грузоподъемность, радиальная
- C0r91000 N
- nG10000 1/min / Предельная частота вращения
- Cur11300 N / Нагрузка предела усталости, радиальная
- C19,842 mm
- a21 mm / α
XPZ 987 Lw / Ld ( XPZ987 )
Manufacturer: ContiTech AG

Bearing 6226 (226)
Manufacturer: TMB
Sizes: 130x230x40 (mm)
Weight:: 5.85 (kg)

ATG10 2380 MFX - Megaflex ( ATK10 2380 BFX - BRECOFLEX )
Manufacturer: ContiTech AG

AT5 DD
Manufacturer: ContiTech AG

STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TB)
Manufacturer: STO
Sizes: 190x220x15 (mm)

K68 POM(20x23x2,3)
Manufacturer: KASTAS
Sizes: 20x23x2,3 (mm)

Корпус UKT208+H2308
Manufacturer: NACHI
Weight:: 2.5 (kg)

SEALS (REINFORCED SEAL) (FYT)
Manufacturer: FEKO
Sizes: 40x50x7/10 (mm)

CX 106 CX 2757 Ld
Manufacturer: ContiTech AG

STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 48x72x8/9 (mm)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.