ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 30324-A
Inner diameter:: 120 mm
Outer diameter: 260 mm
The size of the width: 59.5 mm
Outer diameter: 260 mm
The size of the width: 59.5 mm
Технические характеристики из каталога производителя:
- Обозначение30324-A
- ПроизводительFAG
- e0,35
- Y00,96
- db min134 mm
- Ca min10 mm
- Cb min13,5 mm
- r1, 2 min4 mm
- r3, 4 min3 mm
- rb max3 mm
- Y1,74
- t59,5 mm
- d260 mm
- B55 mm
- D1183,5 mm / α
- Da max152 mm
- da min221 mm
- ra max4 mm
- m14,3 kg / α Вес
- Cr560000 N
- C0r700000 N / статическая грузоподъемность, радиальная
- nG2800 1/min / Предельная частота вращения
- nB2160 1/min / Базовая тепловая частота вращения
- Cur83000 N / Нагрузка предела усталости, радиальная
- C46 mm
- a48 mm / α
AT10 DD
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ УПОРНЫЙ 81164-M
Manufacturer: INA-FAG
Sizes: 320x400x63 (mm)
ПОДШИПНИК ИГОЛЬЧАТЫЙ РАДИАЛЬНЫЙ K20X26X20
Manufacturer: INA-FAG
Weight:: 0.019 (kg)
K19 PTFE/NBR/POM(130x107x16)
Manufacturer: KASTAS
Sizes: 130x107x16 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 240x280x18 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 38x54x7 (mm)
SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 100x118x10 (mm)
2450 SLV14 DD MEGADYNE ISORAN
Manufacturer: ContiTech AG
HTD 8M 6752 ( HTD8M 6752 -V, -M, -MFX )
Manufacturer: ContiTech AG
C 120 22x3050 Li / 3109 Ld
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.