ContiTech AGAT10 1720 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT10/1720 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 10 |
| Thickness | hs | мм | 5 |
| Tooth height | ht | мм | 2.5 |
| Nominal length | Lp/Lw | мм | 1720 |
| Number of teeth |
172 | ||
| Length (inch) | h | мм | 1720 |
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 31318-N11CA-A120-160
Manufacturer: FAG
Sizes: 90x190x93 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 38x68x10 (mm)
Bearing IR8x12x10.5
Manufacturer: INA-FAG
Sizes: 8x12x10.5 (mm)
Weight:: 0.005 (kg)
Подшипник 6338
Manufacturer: NSK-RHP
Sizes: 190x400x78 (mm)
Weight:: 49.7 (kg)
RPP14 9758 ( RPP 14 9758 -V, -M, -MFX )
Manufacturer: ContiTech AG
Bearing NJ1034M (42134H)
Manufacturer: TMB
Sizes: 170x260x42 (mm)
Weight:: 8.15 (kg)
ATG10 1950 MFX - Megaflex ( ATK10 1950 BFX - BRECOFLEX )
Manufacturer: ContiTech AG
A 78 13x1980 Li / 2010 Ld
Manufacturer: ContiTech AG
Подшипник 6305ZE
Manufacturer: NACHI
Sizes: 25x62x17 (mm)
Weight:: 0.232 (kg)
Bearing CSK20
Manufacturer: ETERNO
Sizes: 20x47x14 (mm)
Weight:: 110 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
