ContiTech AGAT5 1125 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/1125 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 1125 |
| Number of teeth |
225 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 1125 |
Зубчатый полиуретановый ремень 19,05 мм 075 XL MEGALINEAR ( 19,05 мм 075XL )
Manufacturer: ContiTech AG
T10 DD
Manufacturer: ContiTech AG
RPP8 3920 ( RPP 8 3920 -V, -M, -MFX )
Manufacturer: ContiTech AG
Торцевое уплотнение RM U4(250)-68
Manufacturer: RiMi
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 32x48x8 (mm)
T10 DD
Manufacturer: ContiTech AG
B 207 17x5260 Li / 5305 Ld
Manufacturer: ContiTech AG
5.33 NBR 70(113,67x5,33 )
Manufacturer: KASTAS
Krestovina 18x46,5
Manufacturer: TOYO
Mechanical seal RM 551-95
Manufacturer: RiMi
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
