ContiTech AGAT5 630 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/630 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 630 |
| Number of teeth |
126 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 630 |
V 307/5 F
Manufacturer: ContiTech AG
Bearing 23122 MW33
Manufacturer: ETERNO
Sizes: 110x180x56 (mm)
Weight:: 5.47 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 136.00x150.00x7.00 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 48.70x59.36x5.33 (mm)
Подшипник NA4840
Manufacturer: NSK-RHP
Sizes: 200x250x50 (mm)
Weight:: 5.9 (kg)
ATG10 5520 MFX - Megaflex ( ATK10 5520 BFX - BRECOFLEX )
Manufacturer: ContiTech AG
Подшипник R 1 ZZ
Manufacturer: NSK-RHP
Sizes: 1.397x4.762x2.779 (mm)
Bearing 7310ACM (46310H)
Manufacturer: TMB
Sizes: 50x110x27 (mm)
Weight:: 1.1 (kg)
Подшипник 51234
Manufacturer: NACHI
Sizes: 170x240x55 (mm)
Weight:: 3.9 (kg)
SEALS (REINFORCED SEAL) (BS)
Manufacturer: FEKO
Sizes: 139.70x171.45x15.86 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
