ContiTech AGAT5 490 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/490 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 490 |
| Number of teeth |
98 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 490 |
3.53 FKM 80(026,58x03,53 )
Manufacturer: KASTAS
O-RING
Manufacturer: NQK SF
Sizes: 1.80x5.00x1.60 (mm)
Подшипник 150KBE2601+L
Manufacturer: NSK-RHP
Sizes: 150x260x150 (mm)
Weight:: 30 (kg)
Торцевое уплотнение RM Z1-85
Manufacturer: RiMi
AT5 DD
Manufacturer: ContiTech AG
XPA 1482 Lw / Ld ( ХРА 1482 )
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 75x130x13 (mm)
840 XH
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 89.00x95.00x3.00 (mm)
Подшипник 7208B
Manufacturer: NACHI
Sizes: 40x80x18 (mm)
Weight:: 0.38 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
