ContiTech AGAT5 300 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/300 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 300 |
| Number of teeth |
60 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 300 |
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ PNA40/62
Manufacturer: INA-FAG
Sizes: 40x62x20 (mm)
Bearing SCE1816
Manufacturer: INA-FAG
Sizes: 28.575x34.925x25.400 (mm)
Weight:: 0.040 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 48x69x10 (mm)
C 79 22x2005 Li / 2064 Ld
Manufacturer: ContiTech AG
K23 PU(101,6x88,9x6,35)
Manufacturer: KASTAS
Sizes: 101,6x88,9x6,35 (mm)
RPP8 3944 ( RPP 8 3944 -V, -M, -MFX )
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 290x330x18 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 190x240x18 (mm)
Bearing 21322K (53322k)
Manufacturer: TMB
Sizes: 110x240x50 (mm)
Weight:: 11 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 63.50x92.15x12.70 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
