ContiTech AGAT3/270 GEN III ( АТ3 270 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/270 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 270 |
| Number of teeth |
90 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 270 |
K65 NBR (32x22x2,3)
Manufacturer: KASTAS
Sizes: 32x22x2,3 (mm)
T5 1500 ( Т5 1500 ) MEGADYNE MEGAPOWER
Manufacturer: ContiTech AG
K21 NBR(15x28x8)
Manufacturer: KASTAS
Sizes: 15x28x8 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 9x18x7 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 11x25x7 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 105x125x10 (mm)
K708 PTFE/NBR(160x168,8x6 )
Manufacturer: KASTAS
Sizes: 160x168,8x6 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 43x50x7 (mm)
Подшипник 240/630CAK30E4
Manufacturer: NSK-RHP
Sizes: 630x920x290 (mm)
Weight:: 637 (kg)
Подшипник NJ 2312
Manufacturer: NACHI
Sizes: 60x130x46 (mm)
Weight:: 2.69 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
