ContiTech AGAT5/1230 ( АТ5 1230 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/1230
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 1230 |
| Number of teeth |
246 | ||
| Width | bo | мм | 10 |
| Step | АТ5 |
ПОДШИПНИК ШПИНДЕЛЬНЫЙ HCB71901-E-T-P4S
Manufacturer: FAG
Sizes: 12x24x6 (mm)
HTD 1400 14M CXP
Manufacturer: ContiTech AG
Bearing AS160200
Manufacturer: INA-FAG
Sizes: 160x200x1 (mm)
Weight:: 0.089 (kg)
ШАРИКОПОДШИПНИК РАДИАЛЬНО-УПОРНЫЙ С ЧЕТЫРЕХТОЧЕЧНЫМ КОНТАКТОМ QJ232-N2-MPA
Manufacturer: FAG
Sizes: 160x290x48 (mm)
K18 (120x106x22,4)
Manufacturer: KASTAS
Sizes: 120x106x22,4 (mm)
SEALS (REINFORCED SEAL) (G)
Manufacturer: FEKO
Sizes: 30x47x7 (mm)
K26 NBR 80(175x20x40)
Manufacturer: KASTAS
Sizes: 175x20x40 (mm)
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ RNA4902
Manufacturer: INA-FAG
Sizes: 20x28x13 (mm)
HTD 8M 7160 ( HTD8M 7160 -V, -M, -MFX )
Manufacturer: ContiTech AG
Корпус UGFL205
Manufacturer: NACHI
Weight:: 0.63 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
