ContiTech AGCTD 1610 C14M CARBON
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 1610 C14M CARBON
Trademark : CONTI®SYNCHROCHAIN CARBON
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 14 |
| Thickness | hs | мм | 10 |
| Tooth height | ht | мм | 6.1 |
| Nominal length | Lp/Lw | мм | 1610 |
| Number of teeth |
115 | ||
| Minimum pulley diameter | dw | мм | 124.78 |
SPZ 1587
Manufacturer: ContiTech AG
Подшипник 29496E
Manufacturer: NACHI
Sizes: 480x850x224 (mm)
Weight:: 543 (kg)
Mechanical seal RM 58U-90
Manufacturer: RiMi
SEALS (REINFORCED SEAL) (F)
Manufacturer: FEKO
Sizes: 55.20x70x10 (mm)
T10 DD
Manufacturer: ContiTech AG
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ RCJL60-N
Manufacturer: INA-FAG
SPC 8500 Ld
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 32.00x35.40x1.70 (mm)
STD 768 S8M CXP
Manufacturer: ContiTech AG
3.53 NBR 70(15,47x3,53 )
Manufacturer: KASTAS
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
