ContiTech AGCTD 1040 C8M CARBON
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 1040 C8M CARBON
Trademark : CONTI®SYNCHROCHAIN CARBON
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 1040 |
| Number of teeth |
130 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
V 1635/9 DLII
Manufacturer: ContiTech AG
3.53 NBR 90(069,85x03,53)
Manufacturer: KASTAS
O-RING
Manufacturer: NQK SF
Sizes: 43.00x52.00x4.50 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 50x65x8 (mm)
AT10 DD
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 88x110x13 (mm)
Bearing 24034 MW33
Manufacturer: ETERNO
Sizes: 170x260x90 (mm)
Weight:: 17.2 (kg)
R-2100
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 60x94x10 (mm)
1.78 NBR 90(006,07x01,78)
Manufacturer: KASTAS
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
