ContiTech AGCTD 2520 C8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 2520 C8M
Trademark : CONTI®SYNCHROCHAIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 2520 |
| Number of teeth |
315 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
| Width | bo | мм | 105 |
K68 POM(130x135x15)
Manufacturer: KASTAS
Sizes: 130x135x15 (mm)
Подшипник NJ 204 E
Manufacturer: NACHI
Sizes: 20x47x14 (mm)
Weight:: 0.124 (kg)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 66.67x89.03x12.70 (mm)
Подшипник 23972EK
Manufacturer: NACHI
Sizes: 360x480x90 (mm)
Weight:: 46.2 (kg)
5.33 NBR 70(062,87x05,33)
Manufacturer: KASTAS
Bearing NJ1014M (42114H)
Manufacturer: TMB
Sizes: 70x110x20 (mm)
Weight:: 0.62 (kg)
Подшипник 7226B
Manufacturer: NACHI
Sizes: 130x230x40 (mm)
Weight:: 6.88 (kg)
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 33x50x7 (mm)
K37 (180x200x14,50)
Manufacturer: KASTAS
Sizes: 180x200x14,50 (mm)
Bearing 32017 X2 ()
Manufacturer: GMB
Sizes: 85x130x27 (mm)
Weight:: 1.25 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
