ContiTech AGCTD 1600 C8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 1600 C8M
Trademark : CONTI®SYNCHROCHAIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 1600 |
| Number of teeth |
200 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
| Width | bo | мм | 105 |
K22 NBR(28x36x5,7)
Manufacturer: KASTAS
Sizes: 28x36x5,7 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 92.00x100.00x4.00 (mm)
AT5 DD
Manufacturer: ContiTech AG
Mechanical seal RM 551С
Manufacturer: RiMi
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 78x90x13 (mm)
Подшипник 7240B
Manufacturer: NACHI
Sizes: 200x360x58 (mm)
Weight:: 25.5 (kg)
1.5 NBR 70(005,50x01,50)
Manufacturer: KASTAS
SEALS (REINFORCED SEAL) (TF)
Manufacturer: FEKO
Sizes: 66.60x94x13 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 56x85x12/9 (mm)
T5 DD
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
