ContiTech AGDHTD 710 D5M CXP
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 710 D5M CXP
Trademark : CONTI® SYNCHROTWIN CXP
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 5.4 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 710 |
| Number of teeth |
142 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
Подшипник NU 2310 E
Manufacturer: NACHI
Sizes: 50x110x40 (mm)
Weight:: 1.85 (kg)
SEALS (REINFORCED SEAL) (G)
Manufacturer: FEKO
Sizes: 35x58x15 (mm)
K18 (139,7x114,3x31,75 )
Manufacturer: KASTAS
Sizes: 139,7x114,3x31,75 (mm)
Корпус UKFLX10+H2310
Manufacturer: NACHI
Weight:: 3.6 (kg)
AT5 DD
Manufacturer: ContiTech AG
MEGADYNE ISORAN 1080 SLV8 ( RPP8 1080 SILVER )
Manufacturer: ContiTech AG
K27 NBR(25x33x7/5)
Manufacturer: KASTAS
Sizes: 25x33x7/5 (mm)
AT5 DD
Manufacturer: ContiTech AG
HTD 1050 5M
Manufacturer: ContiTech AG
HTD 784 8M CXA
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
