ContiTech AG730 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 730 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 730 |
| Nominal length | Lp/Lw | мм | 1854.2 |
| Number of teeth |
146 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 35x54x10 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 64x80x8 (mm)
Bearing NF322
Manufacturer: ETERNO
Sizes: 110x240x50 (mm)
Weight:: 9.46 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 184.50x201.30x8.40 (mm)
Подшипник 7324
Manufacturer: NACHI
Sizes: 120x260x55 (mm)
Weight:: 14.2 (kg)
Подшипник 23260CAE4
Manufacturer: NSK-RHP
Sizes: 300x540x192 (mm)
Weight:: 189 (kg)
K69 POM(115x110x9,3)
Manufacturer: KASTAS
Sizes: 115x110x9,3 (mm)
Bearing 40X12
Manufacturer: INA-FAG
Sizes: 101.575x149.352x37.720 (mm)
Weight:: 2.220 (kg)
Корпус UCF209
Manufacturer: NACHI
Weight:: 2.4 (kg)
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
