ContiTech AGDHTD 2400 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 2400 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 8 |
Thickness | hs | мм | 8.2 |
Tooth height | ht | мм | 3.4 |
Nominal length | Lp/Lw | мм | 2400 |
Number of teeth |
300 | ||
Minimum pulley diameter | dw | мм | 56.02 |
Подшипник NJ 1022
Manufacturer: NSK-RHP
Sizes: 110x170x28 (mm)
Weight:: 2.27 (kg)

Krestovina 44x124,8
Manufacturer: TOYO

SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 890x930x23 (mm)

3.53 FKM 80(058,74x03,53 )
Manufacturer: KASTAS

AT10/1080 ( АТ10 1080 )
Manufacturer: ContiTech AG

Mechanical seal RM 2100-75
Manufacturer: RiMi

Подшипник NP 307
Manufacturer: NACHI
Sizes: 35x68.2x21 (mm)
Weight:: 0.46 (kg)

Подшипник 105KBE22
Manufacturer: NACHI
Sizes: 105x190x95 (mm)
Weight:: 12.2 (kg)

Подшипник 30348
Manufacturer: NSK-RHP
Sizes: 240x500x105 (mm)
Weight:: 92.6 (kg)

O-RING
Manufacturer: NQK SF
Sizes: 8.00x15.00x3.50 (mm)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.