ContiTech AGDHTD 2000 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 2000 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 8 |
Thickness | hs | мм | 8.2 |
Tooth height | ht | мм | 3.4 |
Nominal length | Lp/Lw | мм | 2000 |
Number of teeth |
250 | ||
Minimum pulley diameter | dw | мм | 56.02 |
Bearing SCH06604PR
Manufacturer: INA-FAG
Sizes: 17.015x23.838x17.480 (mm)
Weight:: 0.013 (kg)

Bearing GIR40 DO
Manufacturer: ETERNO
Sizes: 40x92x28 (mm)

Y-1200
Manufacturer: ContiTech AG

5.33 NBR 70(032,69x05,33)
Manufacturer: KASTAS

K21 PU(52x62x6)
Manufacturer: KASTAS
Sizes: 52x62x6 (mm)

B 104 17x2640 Li / 2685 Ld
Manufacturer: ContiTech AG

DSTD 960 DS8M CXP
Manufacturer: ContiTech AG

T5 DD
Manufacturer: ContiTech AG

SEALS (REINFORCED SEAL) (FYZ)
Manufacturer: FEKO
Sizes: 99x113.30x16 (mm)

K37 (80x100x14)
Manufacturer: KASTAS
Sizes: 80x100x14 (mm)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.