ContiTech AGDHTD 640 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 640 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 8 |
| Thickness | hs | мм | 8.2 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 640 |
| Number of teeth |
80 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
B-1750
Manufacturer: ContiTech AG
Подшипник 241/500CAE4
Manufacturer: NSK-RHP
Sizes: 500x830x325 (mm)
Weight:: 666 (kg)
C 108 22x2745 Li / 2804 Ld
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 180x210x15 (mm)
2.4 NBR 70(009,60x02,40)
Manufacturer: KASTAS
RPP14 5418 ( RPP 14 5418 -V, -M, -MFX )
Manufacturer: ContiTech AG
Подшипник NN 3026
Manufacturer: NSK-RHP
Sizes: 130x182x52 (mm)
Weight:: 5.88 (kg)
T10 DD
Manufacturer: ContiTech AG
4 FKM 80(142,00x04,00)
Manufacturer: KASTAS
4L 740
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
