ContiTech AGDHTD 630 D5M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 630 D5M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 5.4 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 630 |
| Number of teeth |
126 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
Bearing S2812
Manufacturer: INA-FAG
Sizes: 44.450x53.975x19.050 (mm)
Weight:: 0.080 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 31x52x7 (mm)
A 77 13x1955 Li / 1985 Ld
Manufacturer: ContiTech AG
725 H DD MEGADYNE ISORAN
Manufacturer: ContiTech AG
HTD 8M 6528 ( HTD8M 6528 -V, -M, -MFX )
Manufacturer: ContiTech AG
Bearing PI081212
Manufacturer: INA-FAG
Sizes: 12.7x19.5x19.5 (mm)
Weight:: 0.226 (kg)
Подшипник 7310B
Manufacturer: NACHI
Sizes: 50x110x27 (mm)
Weight:: 1.14 (kg)
ПОДШИПНИК РОЛИКОВЫЙ УПОРНЫЙ K89428-M
Manufacturer: INA-FAG
Sizes: 140x280x28 (mm)
Bearing NF310
Manufacturer: ETERNO
Sizes: 50x110x27 (mm)
Weight:: 1.241 (kg)
K31 PU/NBR/POM(69,85x82,55x9,525)
Manufacturer: KASTAS
Sizes: 69,85x82,55x9,525 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
