ContiTech AG8V 1600 / 25J 4064 Le
Specifications
Identification on the belt : 8V 1600 / 25J 4064 Le
Trademark : CONTI-V® MULTIBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Minimum pulley diameter | dw | мм | 315 |
| Width | bo | мм | 25 |
| Height | h | мм | 25.5 |
| İnternal length | La | мм | 1632 |
| Calculated length | Ld (Lw, Lp) | мм | - |
| Internal length | Li | мм | 1475 |
| {effective_length} | 1600 | ||
| Profile height | 23 | ||
| Step | 28.6 |
K09 NBR(10x18x4/7)
Manufacturer: KASTAS
Sizes: 10x18x4/7 (mm)
K01 (260x290x60)
Manufacturer: KASTAS
Sizes: 260x290x60 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 256.00x274.00x9.00 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 28x40x8 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC )
Manufacturer: STO
Sizes: 90x130x13 (mm)
MEGADYNE ISORAN 2250 SLV5 ( RPP5 2250 SILVER )
Manufacturer: ContiTech AG
K22 NBR(30x38x6 )
Manufacturer: KASTAS
Sizes: 30x38x6 (mm)
8V 1000 / 25J 2540 Le
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 50x65x10 (mm)
K68 POM(50x55x15)
Manufacturer: KASTAS
Sizes: 50x55x15 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
