ContiTech AG22x2540 C 100
Specifications
Identification on the belt : CONTITECH 22X2540 C 100 C 2599 L=L EL
Trademark : CONTI-V®
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Minimum pulley diameter | dw | мм | 180 |
Width | bo | мм | 22 |
Height | h | мм | 14 |
Length (inch) | h | мм | 100 |
İnternal length | La | мм | 2628 |
Calculated length | Ld (Lw, Lp) | мм | 2599 |
Internal length | Li | мм | 2540 |
Weight, kg) | кг | 0.78 |
Подшипник 6952
Manufacturer: NSK-RHP
Sizes: 260x360x46 (mm)
Weight:: 14 (kg)
![Подшипник 6952](https://bestbearings.az/uploads/products/nachi/bestbearings.az_1652794329.png)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (DCY)
Manufacturer: STO
Sizes: 18x32x10/15 (mm)
![STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (DCY)](https://bestbearings.az/uploads/products/sto/default_sto_salnik.jpg)
2 NBR 90(014,00x02,00)
Manufacturer: KASTAS
![2 NBR 90(014,00x02,00)](https://bestbearings.az/uploads/products/kastas/default_salnik_hidravlik.jpg)
Подшипник 51144X
Manufacturer: NSK-RHP
Sizes: 220x270x37 (mm)
![Подшипник 51144X](https://bestbearings.az/uploads/products/nachi/bestbearings.az_1657040483.png)
Подшипник RS-5024
Manufacturer: NSK-RHP
Sizes: 120x180x80 (mm)
Weight:: 7 (kg)
![Подшипник RS-5024](https://bestbearings.az/uploads/products/nachi/bestbearings.az_1658060650.png)
K68 POM(56x61x9,5)
Manufacturer: KASTAS
Sizes: 56x61x9,5 (mm)
![K68 POM(56x61x9,5)](https://bestbearings.az/uploads/products/kastas/default_salnik_hidravlik_napralicenie.jpg)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TA)
Manufacturer: STO
Sizes: 75x95x13 (mm)
![STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TA)](https://bestbearings.az/uploads/products/sto/default_sto_salnik.jpg)
3L 620
Manufacturer: ContiTech AG
![3L 620](https://bestbearings.az/uploads/products/contitech/belt_3l.png)
Зубчатый полиуретановый ремень 6,35 мм 025 XL MEGALINEAR ( 6,35 мм 025XL )
Manufacturer: ContiTech AG
![Зубчатый полиуретановый ремень 6,35 мм 025 XL MEGALINEAR ( 6,35 мм 025XL )](https://bestbearings.az/uploads/products/contitech/belt_megaflex_xl.png)
AT10 1250 GEN III
Manufacturer: ContiTech AG
![AT10 1250 GEN III](https://bestbearings.az/uploads/products/contitech/belt_at10_geniii.png)
![](https://bestbearings.az/template/img/fllimg1.png)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
![](https://bestbearings.az/template/img/fllimg2.png)
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
![](https://bestbearings.az/template/img/fllimg3.png)
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.