ContiTech AG106XL
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 106XL
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.2 |
| Tooth step | t | мм | 5.08 |
| Thickness | hs | мм | 2.3 |
| Tooth height | ht | мм | 1.27 |
| Nominal length | Lp/Lw | дюйм (1/10) | 106 |
| Nominal length | Lp/Lw | мм | 269.24 |
| Number of teeth |
53 | ||
| Minimum pulley diameter | dw | мм | 16.17 |
| Max line speed | Vmax | м/c | 50 |
Подшипник 63/32
Manufacturer: NACHI
Sizes: 32x75x20 (mm)
Weight:: 0.382 (kg)
Подшипник 260TMP12
Manufacturer: NSK-RHP
Sizes: 260x360x79 (mm)
Подшипник R 1
Manufacturer: NSK-RHP
Sizes: 1.397x4.762x1.984 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 50x62x10/8 (mm)
ContiTech HTD14M 25 HP-PAZ
Manufacturer: ContiTech AG
Торцевое уплотнение RM MG1-20
Manufacturer: RiMi
SPZ 662
Manufacturer: ContiTech AG
Bearing QJ228M (176228H)
Manufacturer: TMB
Sizes: 140x250x42 (mm)
Weight:: 9.85 (kg)
Подшипник NUP 312 EG
Manufacturer: NACHI
Sizes: 60x130x31 (mm)
Weight:: 1.87 (kg)
SEALS (REINFORCED SEAL) (FL)
Manufacturer: FEKO
Sizes: 73.02x101.80x14.38 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
