ContiTech AG840 XH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 840 XH
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.875 |
| Tooth step | t | мм | 22.225 |
| Thickness | hs | мм | 11.2 |
| Tooth height | ht | мм | 6.35 |
| Nominal length | Lp/Lw | дюйм (1/10) | 840 |
| Nominal length | Lp/Lw | мм | 2133.6 |
| Number of teeth |
96 | ||
| Minimum pulley diameter | dw | мм | 141.49 |
| Max line speed | Vmax | м/c | 50 |
AT10 DD
Manufacturer: ContiTech AG
HTD 376 8M CXA
Manufacturer: ContiTech AG
1100 H DD MEGADYNE ISORAN
Manufacturer: ContiTech AG
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 1307-K-TVH-C3
Manufacturer: FAG
Sizes: 35x80x21 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 65x88x14 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 24.90x26.50x0.80 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 51.60x63.00x5.70 (mm)
Bearing 609ZP6 (E60019)
Manufacturer: TMB
Sizes: 9x24x7 (mm)
Weight:: 0.014 (kg)
1.5 FKM 80(009,50x01,50)
Manufacturer: KASTAS
Bearing 60012RS (180101K)
Manufacturer: TMB
Sizes: 12x28x8 (mm)
Weight:: 0.022 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
