ContiTech AGSTD 712 S8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP STD 712 S8M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | мм | 8 |
Thickness | hs | мм | 5.3 |
Tooth height | ht | мм | 2.95 |
Nominal length | Lp/Lw | мм | 712 |
Number of teeth |
89 | ||
Minimum pulley diameter | dw | мм | 56.02 |
Max line speed | Vmax | м/c | 50 |
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 35x80x7 (mm)

RPP8 DD 4836 MFX - Megaflex
Manufacturer: ContiTech AG

O-RING
Manufacturer: NQK SF
Sizes: 4.50x6.90x1.20 (mm)

RPP14 5628 ( RPP 14 5628 -V, -M, -MFX )
Manufacturer: ContiTech AG

SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 9x17x4 (mm)

AT20 DD
Manufacturer: ContiTech AG

AT5/630 ( АТ5 630 )
Manufacturer: ContiTech AG

T10 DD
Manufacturer: ContiTech AG

K35 PTFE/NBR(170x190,5x8,1)
Manufacturer: KASTAS
Sizes: 170x190,5x8,1 (mm)

XPB 1510 Lw / Ld ( ХРВ 1510 )
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.