ContiTech AGHTD 288 8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 288 8M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 288 |
| Number of teeth |
36 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
| Max line speed | Vmax | м/c | 50 |
O-RING
Manufacturer: NQK SF
Sizes: 97.50x104.60x3.55 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 103.00x108.00x2.50 (mm)
ПОДШИПНИК ШАРИКОВЫЙ ЗАКРЕПЛЯЕМЫЙ 211-KRR
Manufacturer: INA-FAG
Sizes: 55x100x36 (mm)
5L 310
Manufacturer: ContiTech AG
ПОДШИПНИК ШПИНДЕЛЬНЫЙ B7017-C-T-P4S
Manufacturer: FAG
Sizes: 85x130x22 (mm)
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ KLM12749-LM12710
Manufacturer: FAG
Sizes: 21.986x45.237x15.494 (mm)
K21 PU(12x18x5)
Manufacturer: KASTAS
Sizes: 12x18x5 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 45x72x7 (mm)
K23 NBR(79,37x66,67x6,35)
Manufacturer: KASTAS
Sizes: 79,37x66,67x6,35 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 70.50x74.50x2.00 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
