ContiTech AGHTD 474 3M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 474 3M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 2.4 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 474 |
| Number of teeth |
158 | ||
| Minimum pulley diameter | dw | мм | 9.55 |
| Max line speed | Vmax | м/c | 50 |
B 180 17x4570 Li / 4615 Ld
Manufacturer: ContiTech AG
Подшипник 6906
Manufacturer: NSK-RHP
Sizes: 30x47x9 (mm)
Weight:: 0.052 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 85x140x12 (mm)
Подшипник N 336
Manufacturer: NACHI
Sizes: 180x328x75 (mm)
Weight:: 41.9 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 12x24x7 (mm)
Bearing 608ZZ/Z1P6 (E80018Z1)
Manufacturer: TMB
Sizes: 8x22x7 (mm)
Weight:: 0.012 (kg)
Bearing NJ2326
Manufacturer: ETERNO
Sizes: 130x280x93 (mm)
Weight:: 29.9 (kg)
Bearing 7244 C
Manufacturer: ETERNO
Sizes: 220x400x65 (mm)
Weight:: 33.6 (kg)
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 40x58x10 (mm)
Подшипник 6915NR
Manufacturer: NACHI
Sizes: 75x105x16 (mm)
Weight:: 0.35 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
