ContiTech AGHTD 201 3M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 201 3M
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 2.4 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 201 |
| Number of teeth |
67 | ||
| Minimum pulley diameter | dw | мм | 9.55 |
| Max line speed | Vmax | м/c | 50 |
ПОДШИПНИК ШПИНДЕЛЬНЫЙ B71920-C-T-P4S
Manufacturer: FAG
Sizes: 100x140x20 (mm)
ШАРИКОПОДШИПНИК РАДИАЛЬНО-УПОРНЫЙ С ЧЕТЫРЕХТОЧЕЧНЫМ КОНТАКТОМ QJ317-N2-MPA
Manufacturer: FAG
Sizes: 85x180x41 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 35x54x10 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 18x30x8 (mm)
ПОДШИПНИК ШАРИКОВЫЙ ЗАКРЕПЛЯЕМЫЙ RA010-NPP
Manufacturer: INA-FAG
Sizes: 15.875x40x28.6 (mm)
K504 (40x32x9,5)
Manufacturer: KASTAS
Sizes: 40x32x9,5 (mm)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ PCJT30-N-FA125
Manufacturer: INA-FAG
СТУПИЧНЫЙ ПОДШИПНИК 4T-07204
Manufacturer:
Weight:: 0.06 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 64.60x71.60x3.50 (mm)
K62 NBR(8x4x1,6)
Manufacturer: KASTAS
Sizes: 8x4x1,6 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
