ContiTech AG480H
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 480 H
Trademark : CONTI®SYNCHROBELT
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 0.5 |
Tooth step | t | мм | 12.7 |
Thickness | hs | мм | 4.3 |
Tooth height | ht | мм | 2.29 |
Nominal length | Lp/Lw | дюйм (1/10) | 480 |
Nominal length | Lp/Lw | мм | 1219.2 |
Number of teeth |
96 | ||
Minimum pulley diameter | dw | мм | 64.68 |
Max line speed | Vmax | м/c | 50 |
Bearing 7408BM (66408H)
Manufacturer: TMB
Sizes: 40x110x27 (mm)
Weight:: 1.4 (kg)

SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 85x110x12 (mm)

Manufacturer: ContiTech AG

XPC 2650 Lw / Ld ( ХРС 2650 )
Manufacturer: ContiTech AG

SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 220x255x18 (mm)

Подшипник NUP 2304
Manufacturer: NACHI
Sizes: 20x52x21 (mm)
Weight:: 0.213 (kg)

Bearing WS81126
Manufacturer: INA-FAG
Sizes: 130x170x9 (mm)
Weight:: 0.663 (kg)

ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ GLCTE17
Manufacturer: INA-FAG

MEGADYNE ISORAN 2310 PLT14 ( RPP14 2310 PLATINUM )
Manufacturer: ContiTech AG

K41 PTFE/NBR(210x189,5x8,1)
Manufacturer: KASTAS
Sizes: 210x189,5x8,1 (mm)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.