ПОДШИПНИК РОЛИКОВЫЙ ОДНОРЯДНЫЙ СФЕРИЧЕСКИЙ 20224-K-MB-C3
Inner diameter:: 120 mm
Outer diameter: 215 mm
The size of the width: 40 mm
Outer diameter: 215 mm
The size of the width: 40 mm
Технические характеристики из каталога производителя:
- Обозначение20224-K-MB-C3
- ПроизводительFAG
- d215 mm
- B40 mm
- D1191,1 mm
- Da max203 mm
- da min132 mm
- ra max2,1 mm
- rmin2,1 mm
- m6,51 kg / Вес
- Cr305000 N / динамическая грузоподъемность, радиальная
- C0r415000 N / статическая грузоподъемность, радиальная
- nG3350 1/min / Предельная частота вращения
- Cur38000 N / Нагрузка предела усталости, радиальная
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 22x35x6.30 (mm)
HTD 8M 5528 ( HTD8M 5528 -V, -M, -MFX )
Manufacturer: ContiTech AG
AT10 DD
Manufacturer: ContiTech AG
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TA)
Manufacturer: STO
Sizes: 50x70x13 (mm)
K35 PTFE/NBR(18x25,3x3,2)
Manufacturer: KASTAS
Sizes: 18x25,3x3,2 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 74x125x13 (mm)
Корпус UGP208
Manufacturer: NACHI
Weight:: 2.1 (kg)
K504 (400x380x25,5)
Manufacturer: KASTAS
Sizes: 400x380x25,5 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (STC)
Manufacturer: STO
Sizes: 35x62x6/8 (mm)
Подшипник 7003DT
Manufacturer: NACHI
Sizes: 17x35x10 (mm)
Weight:: 0.045 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
