ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ KL44649-L44610
Inner diameter:: 26.988 mm
Outer diameter: 50.292 mm
The size of the width: 14.224 mm
Outer diameter: 50.292 mm
The size of the width: 14.224 mm
Технические характеристики из каталога производителя:
- ОбозначениеKL44649-L44610
- ПроизводительFAG
- e0,37
- Y00,88
- db min37,5 mm
- Ca min2,5 mm
- Cb min3,5 mm
- r1, 2 min3,6 mm
- r3, 4 min1,3 mm
- rb max1,3 mm
- Y1,6
- t14,224 mm
- d50,292 mm
- B14,732 mm
- D140,1 mm / α
- Da max31 mm
- da min44,5 mm
- ra max3,6 mm
- m0,119 kg / α Вес
- Cr26000 N / динамическая грузоподъемность, радиальная
- C0r29500 N
- nG15200 1/min / Предельная частота вращения
- Cur3150 N / Нагрузка предела усталости, радиальная
- C10,668 mm
- a11 mm / α
SEALS (REINFORCED SEAL) (FYZ)
Manufacturer: FEKO
Sizes: 70x79x5.30 (mm)
Manufacturer: ContiTech AG
HTD 8M 4512 ( HTD8M 4512 -V, -M, -MFX )
Manufacturer: ContiTech AG
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ RASE30-N-FA125
Manufacturer: INA-FAG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 55x65x7 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 17x29x5 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 210.00x224.00x7.00 (mm)
K21 NBR(75x95x12)
Manufacturer: KASTAS
Sizes: 75x95x12 (mm)
XPB 2150 Lw / Ld ( ХРВ 2150 )
Manufacturer: ContiTech AG
RPP8 4600 ( RPP 8 4600 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.