ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ С ОДНИМ НАРУЖНЫМ ШТАМПОВАННЫМ КОЛЬЦОМ HK4518-RS
Inner diameter:: 45 mm
Outer diameter: 52 mm
The size of the width: 18 mm
Outer diameter: 52 mm
The size of the width: 18 mm
Технические характеристики из каталога производителя:
- ОбозначениеHK4518-RS
- ПроизводительINA
- Fw45 mm
- d52 mm
- rmin0,8 mm
- m50 g / Вес
- Cr21300 N / динамическая грузоподъемность, радиальная
- C0r43000 N / статическая грузоподъемность, радиальная
- Cur5700 N / нагрузка предела усталости радиальная
- nG Fett4000 1/min / Предельная частота вращения при консистентной смазке
- C18 mm / Допуск: -0,3
K73 POLYESTER/PTFE(105x110x9,7)
Manufacturer: KASTAS
Sizes: 105x110x9,7 (mm)
K27 NBR(55x65x7/5)
Manufacturer: KASTAS
Sizes: 55x65x7/5 (mm)
1400H
Manufacturer: ContiTech AG
Корпус UCF310
Manufacturer: NACHI
Weight:: 4.7 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 60.95x77.35x8 (mm)
K73 POLYESTER/PTFE(85x90x5,6)
Manufacturer: KASTAS
Sizes: 85x90x5,6 (mm)
Подшипник 359S/354A
Manufacturer: NSK-RHP
Sizes: 46.038x85x20.638 (mm)
Weight:: 0.505 (kg)
CONTI-V D112 32X2845 Li/2921 Ld L=L EL
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (SCT)
Manufacturer: FEKO
Sizes: 160x196x14/22 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 95x115x10 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
