Подшипник 663/652
Inner diameter:: 82.55 mm
Outer diameter: 152.4 mm
The size of the width: 41.275 mm
Weight:: 3.11 kg
Outer diameter: 152.4 mm
The size of the width: 41.275 mm
Weight:: 3.11 kg
Технические характеристики из каталога производителя:
- Обозначение 663/652
- Размер (r min.) 3,5 мм.
- Количество дорожек качения 1
- Уплотнение Нет
- Производитель NSK
- Масса 3,11 Кг
- Частота вращения предельная при пластичной смазке 2400 об/мин
- Частота вращения предельная при жидкой смазке 3200 об/мин
- Размер сопряженных деталей (ra max.) 3,5
- Размер (a) 33,2 мм.
- Размер (r1 min.) 3,3 мм.
- Размер сопряженных деталей (Da) 99
- Размер сопряженных деталей (db) 141
- Расчетный коэффициент (e) 0,41
- Расчетный коэффициент (Y0) 0,81
- Расчетный коэффициент (Y1) 1,5
- Размер сопряженных деталей (ra1 max.) 3,3
Подшипник NU 2236 E
Manufacturer: NACHI
Sizes: 180x320x86 (mm)
Weight:: 34.5 (kg)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНЫЙ 6300-2Z
Manufacturer: FAG
Sizes: 10x35x11 (mm)
CX 80 CX 2097 Ld
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (BS)
Manufacturer: FEKO
Sizes: 63x110x20 (mm)
C 120 3125 Le/ 3050 Li
Manufacturer: ContiTech AG
RPP14 DD 3818 MFX - Megaflex
Manufacturer: ContiTech AG
Bearing 23068 (3053168)
Manufacturer: TMB
Sizes: 340x520x133 (mm)
Weight:: 105 (kg)
ПОДШИПНИК ИГОЛЬЧАТЫЙ РАДИАЛЬНЫЙ K25X35X30
Manufacturer: INA-FAG
Weight:: 0.065 (kg)
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ САМОЦЕНТРИРУЮЩИЙСЯ 23052-MB
Manufacturer: FAG
Sizes: 260x400x104 (mm)
Weight:: 49.3 (kg)
Bearing 21318W33 (53318w33)
Manufacturer: TMB
Sizes: 90x190x43 (mm)
Weight:: 7.25 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.