ContiTech AGAT10 1940 ( АТ10 1940 ) MEGADYNE MEGAPOWER
Specifications
Identification on the belt : MEGAPOWER AT10 1940 Made in Italy
Trademark : MEGAPOWER
Manufacturer : MEGADYNE (Италия)
Belt dimensions:
| Tooth step | t | мм | 10 |
| Thickness | hs | мм | 4.5 |
| Tooth height | ht | мм | 2.5 |
| Nominal length | Lp/Lw | мм | 1940 |
| Number of teeth |
194 | ||
| Step | AT10 |
O-RING
Manufacturer: NQK SF
Sizes: 88.00x94.00x3.00 (mm)
SEALS (REINFORCED SEAL) (AR)
Manufacturer: FEKO
Sizes: 6x15x4 (mm)
2.5 FKM 80(095,00x02,50)
Manufacturer: KASTAS
K35 PTFE/NBR(195x210,1x6,3 )
Manufacturer: KASTAS
Sizes: 195x210,1x6,3 (mm)
T5 DD
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 35x76x10 (mm)
SEALS (REINFORCED SEAL) (SC)
Manufacturer: FEKO
Sizes: 63.50x88.90x13 (mm)
13x4978 A 196
Manufacturer: ContiTech AG
D 154 32x3915 Li / 3991 Ld
Manufacturer: ContiTech AG
RPP8 5504 ( RPP 8 5504 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
