ContiTech AGMEGADYNE ISORAN 1800 SLV5 ( RPP5 1800 SILVER )
Specifications
Identification on the belt :
Trademark : ISORAN® RPP SILVER
Manufacturer : MEGADYNE (Италия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 3.8 |
| Tooth height | ht | мм | 2 |
| Nominal length | Lp/Lw | мм | 1800 |
| Number of teeth |
360 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
3 FKM 80(013,00x03,00)
Manufacturer: KASTAS
SEALS (REINFORCED SEAL) (FY)
Manufacturer: FEKO
Sizes: 50.50x54x3.40 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 25x35x6 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 30x41x10/5 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 28x38x6/5 (mm)
3V 530 / 9J 1346 Le
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 236.00x246.60x5.30 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 6.00x9.00x1.50 (mm)
Manufacturer: ContiTech AG
K708 PTFE/NBR(137x145,8x6)
Manufacturer: KASTAS
Sizes: 137x145,8x6 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
