ContiTech AGMEGADYNE ISORAN 3280 RPP8 ( RPP 8M 3280 )
Specifications
Identification on the belt : MEGADYNE ISORAN® DO NOT CRIMP made in E.E.C.
Trademark : ISORAN
Manufacturer : MEGADYNE (Италия)
Belt dimensions:
Tooth step | t | мм | 8 |
Thickness | hs | мм | 5.4 |
Tooth height | ht | мм | 3.2 |
Nominal length | Lp/Lw | мм | 3280 |
Number of teeth |
410 | ||
Minimum pulley diameter | dw | мм | 56.02 |
AT20/1200 ( АТ20 1200 )
Manufacturer: ContiTech AG

Manufacturer: ContiTech AG

SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 46x56.40x7 (mm)

SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 55x72x8 (mm)

ZX 30 ZX 784 Ld
Manufacturer: ContiTech AG

SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 19x35x8 (mm)

O-RING
Manufacturer: NQK SF
Sizes: 5.00x8.60x1.80 (mm)

K702 PTFE/NBR(25x32,5x3,2)
Manufacturer: KASTAS
Sizes: 25x32,5x3,2 (mm)

Manufacturer: ContiTech AG

HTD 8M 5152 ( HTD8M 5152 -V, -M, -MFX )
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.