ContiTech AGMEGADYNE ISORAN 1904 RPP8 ( RPP 8M 1904 )
Specifications
Identification on the belt : MEGADYNE ISORAN® DO NOT CRIMP made in E.E.C.
Trademark : ISORAN
Manufacturer : MEGADYNE (Италия)
Belt dimensions:
Tooth step | t | мм | 8 |
Thickness | hs | мм | 5.4 |
Tooth height | ht | мм | 3.2 |
Nominal length | Lp/Lw | мм | 1904 |
Number of teeth |
238 | ||
Minimum pulley diameter | dw | мм | 56.02 |
SEALS (REINFORCED SEAL) (A-B)
Manufacturer: FEKO
Sizes: 20x35x7 (mm)

STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 50x68x8 (mm)

K17X PTFE/NBR(225x204x8,1)
Manufacturer: KASTAS
Sizes: 225x204x8,1 (mm)

Подшипник 52208
Manufacturer: NSK-RHP
Sizes: 40x68x36 (mm)
Weight:: 225 (kg)

ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ RNAO30X42X32-ZW-ASR1
Manufacturer: INA-FAG
Sizes: 30x42x32 (mm)

Подшипник 6310ZENR
Manufacturer: NACHI
Sizes: 50x110x27 (mm)
Weight:: 1.07 (kg)

Подшипник 22248CAKE4
Manufacturer: NSK-RHP
Sizes: 240x440x120 (mm)
Weight:: 80.2 (kg)

Подшипник 749A/742
Manufacturer: NSK-RHP
Sizes: 82.55x150.089x44.45 (mm)
Weight:: 3.33 (kg)

STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TCG)
Manufacturer: STO
Sizes: 120x160x15 (mm)

ПОДШИПНИК РОЛИКОВЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ ДЛЯ МАШИН С КОЛЕБАТЕЛЬНЫМ МЕХАНИЗМОМ 22318-E1-K-T41A
Manufacturer: FAG
Sizes: 90x190x64 (mm)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.