ContiTech AGMEGADYNE ISORAN 195 RPP3 ( RPP 3M 195 )
Specifications
Identification on the belt : MEGADYNE ISORAN® DO NOT CRIMP made in E.E.C.
Trademark : ISORAN®
Manufacturer : MEGADYNE (Италия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 2.4 |
| Tooth height | ht | мм | 1.15 |
| Nominal length | Lp/Lw | мм | 195 |
| Number of teeth |
65 | ||
| Minimum pulley diameter | dw | мм | 9.55 |
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 36x50x7 (mm)
AT10 DD
Manufacturer: ContiTech AG
K03 (110x90x20,6)
Manufacturer: KASTAS
Sizes: 110x90x20,6 (mm)
HTD 1016 8M
Manufacturer: ContiTech AG
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC )
Manufacturer: STO
Sizes: 32x55x10 (mm)
K19 PTFE/NBR/POM(105x90x12,5)
Manufacturer: KASTAS
Sizes: 105x90x12,5 (mm)
B 49 17x1245 Li / 1290 Ld
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FY)
Manufacturer: FEKO
Sizes: 52x68.15x6 (mm)
V 203/5 F
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
