ContiTech AGAT10 1150 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT10/1150 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 10 |
| Thickness | hs | мм | 5 |
| Tooth height | ht | мм | 2.5 |
| Nominal length | Lp/Lw | мм | 1150 |
| Number of teeth |
115 | ||
| Length (inch) | h | мм | 1150 |
MEGADYNE ISORAN 1863 RPP3 ( RPP 3M 1863 )
Manufacturer: ContiTech AG
HTD 117 3M CXP
Manufacturer: ContiTech AG
HTD 8M 5280 ( HTD8M 5280 -V, -M, -MFX )
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 34x56x9 (mm)
2.5 NBR 70(057,00x02,50)
Manufacturer: KASTAS
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 154x175x14 (mm)
GEAR PULLEYS 14M-38S 166.54 (14M-38S 166.54/68)
Manufacturer: BBC
XPC 4750 Lw / Ld ( ХРС 4750 )
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 54x65x13 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
