ContiTech AGAT10 1100 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT10/1100 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 10 |
| Thickness | hs | мм | 5 |
| Tooth height | ht | мм | 2.5 |
| Nominal length | Lp/Lw | мм | 1100 |
| Number of teeth |
110 | ||
| Length (inch) | h | мм | 1100 |
ATG10 3360 MFX - Megaflex ( ATK10 3360 BFX - BRECOFLEX )
Manufacturer: ContiTech AG
XPA 1732 Lw / Ld ( ХРА 1732 )
Manufacturer: ContiTech AG
K21 NBR(34x44x5)
Manufacturer: KASTAS
Sizes: 34x44x5 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 380.00x396.00x8.00 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 94.40x100.60x3.10 (mm)
3.53 FKM 80(228,19x03,53)
Manufacturer: KASTAS
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 57x112x10 (mm)
AT5 DD
Manufacturer: ContiTech AG
Зубчатый полиуретановый ремень 200 XH
Manufacturer: ContiTech AG
K03 (63x48x12,5)
Manufacturer: KASTAS
Sizes: 63x48x12,5 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
