ContiTech AGAT10 730 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT10/730 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 10 |
| Thickness | hs | мм | 5 |
| Tooth height | ht | мм | 2.5 |
| Nominal length | Lp/Lw | мм | 730 |
| Number of teeth |
73 | ||
| Length (inch) | h | мм | 730 |
SEALS (REINFORCED SEAL) (FY)
Manufacturer: FEKO
Sizes: 28x35.10x4 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 11.00x14.80x1.90 (mm)
A 53,5 13x1360 Li / 1390 Ld
Manufacturer: ContiTech AG
Подшипник 08118/08231
Manufacturer: NSK-RHP
Sizes: 30.162x58.738x14.684 (mm)
Weight:: 0.177 (kg)
Подшипник 6921ZZ
Manufacturer: NSK-RHP
Sizes: 105x145x20 (mm)
Weight:: 0.856 (kg)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 30x47x10 (mm)
Подшипник 51207
Manufacturer: NACHI
Sizes: 35x62x18 (mm)
Weight:: 225 (kg)
Подшипник 2984/2924
Manufacturer: NSK-RHP
Sizes: 46.038x85x25.4 (mm)
Weight:: 0.62 (kg)
Корпус UCTU313+WU500
Manufacturer: NACHI
Weight:: 38.3 (kg)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ RTUEY80
Manufacturer: INA-FAG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
