ContiTech AGAT5 1750 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/1750 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 1750 |
| Number of teeth |
350 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 1750 |
ПОДШИПНИК КОМБИНИРОВАННЫЙ РОЛИКОВЫЙ ZARN2572-L-TV
Manufacturer: INA-FAG
Sizes: 25x45x75 (mm)
Подшипник 6905N
Manufacturer: NACHI
Sizes: 25x42x9 (mm)
Weight:: 0.044 (kg)
Подшипник 22211AEXK
Manufacturer: NACHI
Sizes: 55x100x25 (mm)
Weight:: 0.89 (kg)
Bearing FT38
Manufacturer: INA-FAG
Sizes: 71.438x113.513x25.400 (mm)
Weight:: 0.924 (kg)
DHTD 1190 D14M CXP
Manufacturer: ContiTech AG
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 2322-K-M-C3
Manufacturer: FAG
Sizes: 110x240x80 (mm)
Z 57 10x1450 Li / 1473 Ld
Manufacturer: ContiTech AG
K69 POM(80x72x6)
Manufacturer: KASTAS
Sizes: 80x72x6 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 9x21x5 (mm)
RPP8 1712 ( RPP 8 1712 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
