ContiTech AGAT5 1125 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/1125 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 1125 |
| Number of teeth |
225 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 1125 |
K33 PU(56x71x11,5)
Manufacturer: KASTAS
Sizes: 56x71x11,5 (mm)
ZX 28 ZX 733 Ld
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FY)
Manufacturer: FEKO
Sizes: 45x55x4 (mm)
K06 NBR(100x112x12/7)
Manufacturer: KASTAS
Sizes: 100x112x12/7 (mm)
Bearing BCE1816
Manufacturer: INA-FAG
Sizes: 28.575x34.925x25.400 (mm)
Weight:: 0.040 (kg)
K702 PTFE/NBR(160x171x4,2)
Manufacturer: KASTAS
Sizes: 160x171x4,2 (mm)
Bearings NUKR72
Manufacturer: INA-FAG
Weight:: 1020 (kg)
K22 NBR(50x60x10)
Manufacturer: KASTAS
Sizes: 50x60x10 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 35x55x10 (mm)
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NJ305-E-TVP2
Manufacturer: FAG
Sizes: 25x62x17 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
