ContiTech AGAT5 920 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/920 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 920 |
| Number of teeth |
184 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 920 |
K75 PHENOLIC(260x268x25)
Manufacturer: KASTAS
Sizes: 260x268x25 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 30x55x10 (mm)
Подшипник E32014J
Manufacturer: NACHI
Sizes: 70x110x25 (mm)
Weight:: 0.87 (kg)
ПОДШИПНИК ШАРИКОВЫЙ УПОРНО-РАДИАЛЬНЫЙ ZKLN3072-2RS
Manufacturer: INA-FAG
Sizes: 30x72x38 (mm)
Weight:: 3.9 (kg)
K73 POLYESTER/PTFE(175x180x9,7)
Manufacturer: KASTAS
Sizes: 175x180x9,7 (mm)
Bearing BCH1413P
Manufacturer: INA-FAG
Sizes: 22.225x30.162x20.638 (mm)
Weight:: 0.034 (kg)
Bearing WS89308
Manufacturer: INA-FAG
Sizes: 40x78x7.500 (mm)
Weight:: 0.193 (kg)
4 NBR 70(020,00x04,00)
Manufacturer: KASTAS
K06 NBR(50x65x4/6)
Manufacturer: KASTAS
Sizes: 50x65x4/6 (mm)
Торцевое уплотнение RM MG12-14
Manufacturer: RiMi
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
