ContiTech AGAT5 875 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/875 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 875 |
| Number of teeth |
175 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 875 |
Автомобильные уплотнения RM FB-16^38,7
Manufacturer: RiMi
ПОДШИПНИК ШАРИКОВЫЙ ЗАКРЕПЛЯЕМЫЙ GE30-KRR-B
Manufacturer: INA-FAG
Sizes: 30x62x48.5 (mm)
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NUP2230-E-M1
Manufacturer: FAG
Sizes: 150x270x73 (mm)
K21 NBR(50x63x12 )
Manufacturer: KASTAS
Sizes: 50x63x12 (mm)
Bearing 91992 (1000992)
Manufacturer: TMB
Sizes: 460x620x74 (mm)
K17X PTFE/NBR(225x204x8,1)
Manufacturer: KASTAS
Sizes: 225x204x8,1 (mm)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ RME80
Manufacturer: INA-FAG
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 32x36.40x4.50 (mm)
Bearing K20x30x30
Manufacturer: INA-FAG
Sizes: 20x30x30 (mm)
Weight:: 0.0049 (kg)
K81 TPE(155x165x1,9 )
Manufacturer: KASTAS
Sizes: 155x165x1,9 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
