ContiTech AGAT5 825 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/825 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 825 |
| Number of teeth |
165 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 825 |
K106 NBR(12x16x4/6)
Manufacturer: KASTAS
Sizes: 12x16x4/6 (mm)
ПОДШИПНИК ШПИНДЕЛЬНЫЙ B7202-C-T-P4S
Manufacturer: FAG
Sizes: 15x35x11 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 25x40x8 (mm)
Подшипник 7238BDF
Manufacturer: NACHI
Sizes: 190x340x55 (mm)
Weight:: 21.5 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 34x90x10 (mm)
K781 PTFE(90x95x60 )
Manufacturer: KASTAS
Sizes: 90x95x60 (mm)
AX 114 AX 2926 Ld
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (BT-CR)
Manufacturer: FEKO
Sizes: 215x240x12/18 (mm)
ШАРИКОПОДШИПНИК РАДИАЛЬНО-УПОРНЫЙ КОМБИНИРОВАННЫЙ С ИГОЛЬЧАТЫМИ РОЛИКАМИ NKIB5907
Manufacturer: INA-FAG
Sizes: 35x55x30 (mm)
K29 PU/POM(36x46,7x4,2)
Manufacturer: KASTAS
Sizes: 36x46,7x4,2 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
