ContiTech AGAT5 660 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/660 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 660 |
| Number of teeth |
132 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 660 |
Подшипник NU 2204 E
Manufacturer: NACHI
Sizes: 20x47x18 (mm)
Weight:: 0.162 (kg)
Подшипник 606 VV
Manufacturer: NSK-RHP
Sizes: 6x17x6 (mm)
Weight:: 0.006 (kg)
K46 (76,2x66,66x11,20)
Manufacturer: KASTAS
Sizes: 76,2x66,66x11,20 (mm)
K09 NBR(35x45x4/7)
Manufacturer: KASTAS
Sizes: 35x45x4/7 (mm)
3L 750
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (DY)
Manufacturer: FEKO
Sizes: 40x47x3.50 (mm)
RPP14 3528 ( RPP 14 3528 -V, -M, -MFX )
Manufacturer: ContiTech AG
Подшипник NUP 2318 ET
Manufacturer: NSK-RHP
Sizes: 90x190x64 (mm)
Weight:: 7.9 (kg)
RPP8 1960 ( RPP 8 1960 -V, -M, -MFX )
Manufacturer: ContiTech AG
Подшипник NUP 208 EW
Manufacturer: NSK-RHP
Sizes: 40x80x18 (mm)
Weight:: 0.379 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
