ContiTech AGAT5 600 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/600 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 600 |
| Number of teeth |
120 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 600 |
O-RING
Manufacturer: NQK SF
Sizes: 34.00x43.00x4.50 (mm)
SEALS (REINFORCED SEAL) (ARSE)
Manufacturer: FEKO
Sizes: 40x70/80x10.50/15 (mm)
Bearing 1217 K
Manufacturer: ETERNO
Sizes: 85x150x28 (mm)
Weight:: 2.06 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 45x62x8 (mm)
ПОДШИПНИК РОЛИКОВЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ 22319-E1-K
Manufacturer: FAG
Sizes: 95x200x67 (mm)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-УПОРНЫЙ ZKLDF460
Manufacturer: INA-FAG
Sizes: 460x600x70 (mm)
Weight:: 50 (kg)
K153 NBR FABRIC/POM(22x30x7)
Manufacturer: KASTAS
Sizes: 22x30x7 (mm)
Bearing IR25x30x30
Manufacturer: INA-FAG
Sizes: 25x30x30 (mm)
Weight:: 0.501 (kg)
XPZ 690 Lw / Ld ( XPZ690 )
Manufacturer: ContiTech AG
Подшипник NNCL 4984
Manufacturer: SKF
Sizes: 420x560x140 (mm)
Weight:: 98.6 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
