ContiTech AGAT5 525 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/525 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 525 |
| Number of teeth |
105 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 525 |
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 32238-A-N11CA-A350-400
Manufacturer: FAG
Sizes: 190x340x194 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 68.00x82.00x7.00 (mm)
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ N203-E-TVP2
Manufacturer: FAG
Sizes: 17x40x12 (mm)
AA147,5 ( АА 147,5 ) Le= 3798 мм
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 125x145x12 (mm)
ContiTech STD 8M 50 HP
Manufacturer: ContiTech AG
RPP8 DD 3724 MFX - Megaflex
Manufacturer: ContiTech AG
K73 POLYESTER/PTFE(75x80x25)
Manufacturer: KASTAS
Sizes: 75x80x25 (mm)
K17X PTFE/NBR(315x294x8,1)
Manufacturer: KASTAS
Sizes: 315x294x8,1 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 62x70x12 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
