ContiTech AGAT5 375 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/375 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 375 |
| Number of teeth |
75 | ||
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 375 |
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 120x140x13 (mm)
K751 PTFE/Spring(150x137,8x9,5)
Manufacturer: KASTAS
Sizes: 150x137,8x9,5 (mm)
Bearing SCE66P
Manufacturer: INA-FAG
Sizes: 9.525x14.288x9.525 (mm)
Weight:: 0.005 (kg)
Bearing RF36
Manufacturer: INA-FAG
Sizes: 15.875x57.150x33.340 (mm)
Weight:: 31.75 (kg)
K37 (50x62x8)
Manufacturer: KASTAS
Sizes: 50x62x8 (mm)
K21 NBR(50x60x7)
Manufacturer: KASTAS
Sizes: 50x60x7 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 40x72x7 (mm)
Bearing 51322
Manufacturer: ETERNO
Sizes: 110x190x63 (mm)
Weight:: 7.85 (kg)
Bearing NUP416
Manufacturer: ETERNO
Sizes: 80x200x48 (mm)
Weight:: 7.66 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 19.15x20.71x1.78 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
